Concrete floor hardeners
(Dry-shake, liquid hardeners and stain prevention sealers) There is a common myth spread by construction product marketers that there is no difference between dry-shake and reactive chemical hardening of concrete. This is simply not true since liquid hardeners can only densify concrete without improving its design strength. On the contrary, a correctly selected MBFT or […]
Delamination or spalls of concrete floors
If the existing concrete surface is dusting, our HC Densifier may be applied. HC Densifier is a sodium silicate liquid hardener that penetrates in existing concrete to harden the silicates up to design strength. P3 Primer is used as a bond coat between the existing surface and the new repair. PatchMortar, PatchMortar P or MicroConcrete […]
Aesthetic floor coatings
AcrySeal is an acrylic resin sealer that may be used as a topical coating over unsightly concrete floors to protect and give an aesthetically appealing finish. AcrySeal is a low maintenance and cost effective product that may easily be over coated at any time. FloorCoat is a cementitious, paintable coating high in polymer for overcoating […]
Concrete Floor Treatments
Densifiers, void fillers and protective sealers for concrete floors, including diamond polished Diamond polishing: The grinding process on concrete floors reveals underlying aggregates as well as entrapped air cavities, and pin holes. Removal of the surface crust exposes weaker and dusty matrix. HC Densifier corrects this typical defect and produces a hard wearing, less porous […]
Repairs to concrete floors
If more significant repairs than dusting (covered above) and cracks (covered below) are required, contact Samson for more technical information. For more significant repairs, chip out and the use PatchMortar or MicroConcrete (recommended for repairs over 10mm thick) bonded with P3 Primer. RampSkim is a unique product suitable for 4 – 8mm concrete resurfacing, (e.g. […]