PatchMortar is a powder product to produce an easily trowelable mortar by the addition of water only. PatchMortar is suitable for 5 – 20mm applications. If a thicker repair is required, PatchMortar can be built up with a scratch-coat in between layers.
Where less than 10mm thickness is required you should request PatchMortar P (which is the polymer modified version). CorroBlock is used where corrosion protection of exposed reinforcing steel is required.
FastPatch is a quick setting mortar required for early return to service of repaired concrete.
FlexiPatch is specially designed where reinforcement has too little cover and a level of movement must be accommodated by the hardened patch. Samson recommends that each of the above mortars be used in conjunction with P3 Primer in order to ensure exceptional bond. Detailed technical data sheets and selection advice are available on request.
Solution | Product Info |
| P3 Primer CorroBlock PatchMortar or PatchMortar P FastPatch FlexiPatch | Pack size: 10kg / 20kg Yield: 1kg/mm/m² Water: 30% by mass = 6L / 20kg Pack size: 25kg Yield: 2kg/mm/m² (12L / 25kg) Water: 15% by mass = 3.75L / 25kg Pack size: 25kg Yield: 2kg/mm/m² (12L / 25kg ) Water: 15% by mass = 3.75L / 25kg |